From blank plan to print file in 7 steps

PrintHaus takes you through seven steps, wizard-style — from the floors to the finished print file. Each step has its own panel, and your 3D preview stays live the whole time.

Getting around the wizard

• Sidebar on the left: jump straight to any step, or step one forward and back with Back / Next.
• 3D preview in the middle: always visible, in every step — you see every change on the model instantly.

Floor plan first

From the roof step onward, every later step stays locked as long as your floor plan is geometrically invalid. Floors and Floor plan, on the other hand, you can open at any time.

The seven steps

Step 0 · Floors Set the number of full floors (1 to 10) and give each floor a ceiling height (0,3 to 8,0 m).

Step 1 · Floor plan Pick a base shape — Rectangular, L-shape, T-shape, U-shape or Free — and enter the edge dimensions (0,5 to 30 m each); with Free you draw the polygon yourself.

Step 2 · Roof Add a roof shape (Gable roof, Hip roof, Shed roof, Flat roof or No roof) and set the pitch and overhang.

Step 3 · Fit-out & Add-ons Place interior walls, stairs, ceiling cutouts, chimneys, balconies, terraces, canopies and columns — per floor, via a mode switch.

Step 4 · Openings Set windows, doors and gates, corner glazing and cutouts into the walls; in the roof tab you also get roof windows and dormers.

Step 5 · Extras Assign textures and surfaces and — if you like — add Bomb Blasts.

Step 6 · Export Choose the scale, set the printer or print bed, and generate the file.

What you end up with

The export gives you your print file as 3MF, STL or STEP.

You'll find the technical terms around the model in the Glossary.